混合工质摩尔配比对LNG绕管式换热器壳侧换热特性的影响
责任编辑：cnlng 浏览：133次 时间： 2024-04-10 10:44:32
免职声明：本网站为公益性网站，部分信息来自网络，如果涉及贵网站的知识产权，请及时反馈，我们承诺第一时间删除！
This website is a public welfare website, part of the information from the Internet, if it involves the intellectual property rights of your website, please timely feedback, we promise to delete the first time.
电话Tel: 19550540085: QQ号: 929496072 or 邮箱Email: Lng@vip.qq.com
摘要:摘要为了明确混合工质摩尔配比对LNG绕管式换热器壳侧换热特性的影响,开展了乙烷/丙烷二元混合工质两相流体在壳侧的换热特性试验研究。其中,乙烷与丙烷摩尔配比分别为10:90、30:70与60:40,干度工况范围为0.2~1.0,质流密度为40~80 kg/(m^2·s),热流密度为6 kW/m^2。试..
|
摘要为了明确混合工质摩尔配比对LNG绕管式换热器壳侧换热特性的影响,开展了乙烷/丙烷二元混合工质两相流体在壳侧的换热特性试验研究。其中,乙烷与丙烷摩尔配比分别为10:90、30:70与60:40,干度工况范围为0.2~1.0,质流密度为40~80 kg/(m^2·s),热流密度为6 kW/m^2。试验结果表明:对于乙烷/丙烷二元混合工质,当干度小于0.7时,换热系数随乙烷摩尔分数的增加而减小;在干度大于0.7时,换热系数随乙烷摩尔分数的增加而增大。In order to clarify the influence of molar fraction of the refrigerant mixture on heat transfer characteristics on the shell side of LNG spiral wound heat exchanger,the experimental study was conducted on the heat transfer characteristics of two-phase propane/ethane binary mixture flow on the shell side.The molar fractions of ethane and propane were 10:90,30:70 and 60:40,respectively.The range of test conditions for the vapor quality was 0.2~0.9,the mass flux was 40~80 kg/(m2·s)and the heat flux was 6 kW/m2.The experimental results indicate that,for the ethane/propane binary mixture,when the vapor quality was smaller than 0.7,the shell-side heat transfer coefficient decreased with the increase of ethane molar fraction;when the vapor quality was larger than 0.7,the shell-side heat transfer coefficient increased with the increase of ethane molar fraction. 机构地区中海石油气电集团技术研发中心 上海交通大学 出处《流体机械》 CSCD 北大核心 2018年第8期17-20,12,共5页Fluid Machinery 基金国家自然科学基金项目(51674165) 上海市优秀学术带头人计划项目(16XD1401500) 关键词LNG 绕管式换热器 乙烷/丙烷二元混合工质 两相流 换热LNG spiral wound heat exchanger ethane/propane binary mixtures two-phase flow heat transfer 分类号 TH137 [机械工程—机械制造及自动化] TK124 [动力工程及工程热物理—工程热物理]
|
分享到:
